C&G Safety your safe choice!

Against particulates such as asbestos, brick dust and cement dust; Suitable for sultry working environment. Features Item No.: ChemPro 6045 Color: Blue Feature: Breathable and comfortable Hood design for optimum fit with full face respirators Elasticated hood, wrist and ankles Bound seams Application : Against particulates such as asbestos, brick dust and cement dust; Suitable for sultry working environment.   Material: SMS non-woven fabric Standards: Type 5 EN ISO13982-1  Solid particulates Type 6 EN13034     Limited protection against liquid chemicals Solid particulates Protective clothing -C&G Safety : Solid particulates Protective clothing

As a professional personal Safety Protective Clothing supplier, Shanghai C&G Safety Co., Ltd. provides arc flash, firefighting, flame resistant, military, aluminized, metal splash clothing, etc. Safety Protective Clothing styles and all details can  customize according to your requirements. 8cal/cm² Arc Flash Protective Clothing Kit Item No.: ArcPro-Kit-8cal 8cal/cm² arc flash protective Jacket 8cal/cm² arc flash protective Pants 8cal/cm² arc flash protective face shield 8cal/cm² arc flash protective gloves Safety helmet - ABS material Insulating gloves Arc flash kit gear bag 12cal/cm² Arc Flash Protective Clothing Kit Item No.: ArcPro-Kit-12cal 12cal/cm² arc flash protective Jacket 12cal/cm² arc flash protective pants 12cal/cm² arc flash protective face shield 12cal/cm² arc flash protective gloves Safety helmet - ABS material Insulating gloves Arc flash kit gear bag 25cal/cm² Arc Flash Protective Clothing Kit Item No.: ArcPro-Kit-25cal 25cal/cm² arc flash protective

Daily clothes like cotton and cotton nylon blends cannot protect people from electric arc injuries. On the contrary, they will increase the hazard. The  protective clothing  made from normal material will be melted or burned when exposed to the heat caused by electric arc explosion. These fabrics will continue to burn even after the electric arc incident, and the injuries may be severer than it caused by the electric arc itself. The heavier the fabric is, the more fuel it provides. Electric arc may end instantly, but daily clothes will continue to burn and even will cause a third-degree burn with just seconds lasting. Besides, those clothes will melt and adhere to skin, which must be erased or even removed by surgery. Survival Rate for different degrees of burn The burn degree may increase when wearing flammable garments and exposed to the explosion of electric arc. The surviving rate depends on many factors, including survivor’s age and total burn area. In all age groups, the greater

What is electrical arc? An electric arc is a visible plasma discharge caused by electrical current ionizing gases in the air. Electric arc is explosive, it will last less than 1 second but will emit high radiant energy which can light and even melt daily clothes .The core temperature of electric arc can reach 20,000℃. Electric arc may induce many secondary hazards such as hot gases, molten metal splash, pressure waves, and even high decibel noise and electric shock. Even though there is a fraction of a second, the harm may last lifelong. Every day, hundreds of thousands of Electric workers are exposed to electric arc hazards, including electrician, wire maintenance inspectors, power plant workers, substation and transformer operators, maintenance technician, etc. Hazards related to electric arc 01 Electrocution When contacting electric arc directly, it will cause electrocution or severe burns. And even  flame retardant garments  cannot protect from the hazard of electrocution. 02 Sever

Nomex military uniforms are made from Du Pont’s Type 455 and Type 462 Nomex III and Nomex IIIA fibers, respectively. Nomex III is a 95/5% blend of Aramid and Kevlar fibers. Nomex IIIA is a 93/5/2% blend of Aramid, Kevlar, and P-140 static dissipative fibers. The P-140 fiber has a conductive carbon black core covered in a protective polyamide sheath. The characteristics of Nomex III and Nomex IIIA cloths are shown in Table 1 Characteristics of Nomex and Cotton Fabrics in Appendix A. The primary source for Department of Defense (DoD) uniforms is the Defense Logistics Agency (DLA). CWU-27/P Flight Suit：The CWU-27/P Summer-weight (4.5 oz.) flight coverall is made from Nomex IIIA cloth. It is a one piece, unlined garment with a zipper front closure and side pass-throughs. It has Velcro adjusters for the waist sleeves, and legs. It includes two welt-style breast pockets, one combination cigarette pack and pencil compartment on the upper front left sleeve, two thigh pockets, a knife pocket

NFPA 70E-rated arc flash protective clothing and electrical arc flash hazrd kits are a safety requirement for employees working on or near energized industrial equipment. We carry a wide selection of 70E Arc Flash HRC 1, HRC 2, HRC 3, and HRC 4 kits, arc flash coveralls, arc flash coats, arc flash jackets, arc flash electrical safety gloves, and accessories by NSA National Safety Apparel, Workrite, Steel Grip, OEL Worldwide and other leading electric protective apparel manufacturers. Anchortex Corporation is a distributor of Hazard Risk Category 1, Hazard Risk Category 2, Hazard Risk Category 3, and Hazard Risk Category 4 arc flash protective gear for industrial and electrical safety and NFPA 70E compliance in the workplace, including gloves, hoods, coveralls, coats, and complete arc flash suits and arc flash kits. Many of our products can be customized by the manufacturer upon request to add NFPA 70E-safe logos and emblems; contact our sales department for more information. The follo

As a professional personal protective clothing and PPE supplier, Shanghai C&G Safety Co., Ltd. provides arc flash, firefighting, flame resistant, military, aluminized, metal splash clothing, etc. A+A Trade Fair 2017 Germany, C&G Products Design