Fire retardant clothing maintenance and preservation methods
Maintenance:
1. The flame retardant clothing should be completely dry before being stored again.
2. Check the status of flame-retardant working clothes after each use.
3. Remove residual dirt from the flame retardant clothing, use neutral soap, and use detergent when necessary.
4. The detergent should be used carefully in the polluted places to avoid damaging the aluminized surface.
If there is oil or grease residue, clean with neutral soap.
6. If the flame retardant clothing is exposed to chemicals or if there are bubbles, clean the entire aluminized surface.
7. If there is no serious wear or burn on the surface of the fire retardant overalls, repair with an aluminized spray gun. If the exterior of the flame retardant suit is damaged, the flame retardant suit should be replaced.
8. It is easy to change the goggles, unzip the back and open the nylon buckle on the right side of the goggles. Take out the unusable goggles, insert them into your new goggles, and carefully push them to the bottom. Correct positioning, and finally attach the fastener of the Velcro strap.
Fire retardant overalls, fire retardant overalls
Fire retardant clothing should be placed in a cool and dry place;
The ideal storage condition is to be placed in a special wardrobe and hung vertically.
If you take out the flame retardant suit from the PVC suitcase or take out the folded flame retardant suit, be careful not to fold or bend too much, otherwise it will damage the aluminized surface.
1. The flame retardant clothing should be completely dry before being stored again.
2. Check the status of flame-retardant working clothes after each use.
3. Remove residual dirt from the flame retardant clothing, use neutral soap, and use detergent when necessary.
4. The detergent should be used carefully in the polluted places to avoid damaging the aluminized surface.
If there is oil or grease residue, clean with neutral soap.
6. If the flame retardant clothing is exposed to chemicals or if there are bubbles, clean the entire aluminized surface.
7. If there is no serious wear or burn on the surface of the fire retardant overalls, repair with an aluminized spray gun. If the exterior of the flame retardant suit is damaged, the flame retardant suit should be replaced.
8. It is easy to change the goggles, unzip the back and open the nylon buckle on the right side of the goggles. Take out the unusable goggles, insert them into your new goggles, and carefully push them to the bottom. Correct positioning, and finally attach the fastener of the Velcro strap.
Fire retardant overalls, fire retardant overalls
FR PROTECTIVE WORK CLOTHES
HIGH VISIBILITY SAFETY APPAREL
COVERALLS & OVERALLS
ARC FLASH PROTECTIVE CLOTHING
Save method:Fire retardant clothing should be placed in a cool and dry place;
The ideal storage condition is to be placed in a special wardrobe and hung vertically.
If you take out the flame retardant suit from the PVC suitcase or take out the folded flame retardant suit, be careful not to fold or bend too much, otherwise it will damage the aluminized surface.
评论
发表评论