C

评论

发表评论

此博客中的热门博文

NFPA 70E Arc Flash Suits · Arc Flash Hazard Suits · Electrical Hazard Protective Clothing

图片
NFPA 70E-rated arc flash protective clothing and electrical arc flash hazrd kits are a safety requirement for employees working on or near energized industrial equipment. We carry a wide selection of 70E Arc Flash HRC 1, HRC 2, HRC 3, and HRC 4 kits, arc flash coveralls, arc flash coats, arc flash jackets, arc flash electrical safety gloves, and accessories by NSA National Safety Apparel, Workrite, Steel Grip, OEL Worldwide and other leading electric protective apparel manufacturers. Anchortex Corporation is a distributor of Hazard Risk Category 1, Hazard Risk Category 2, Hazard Risk Category 3, and Hazard Risk Category 4 arc flash protective gear for industrial and electrical safety and NFPA 70E compliance in the workplace, including gloves, hoods, coveralls, coats, and complete arc flash suits and arc flash kits. Many of our products can be customized by the manufacturer upon request to add NFPA 70E-safe logos and emblems; contact our sales department for more information. ...
阅读全文

Solid particulates Protective clothing -C&G Safety

图片
Against particulates such as asbestos, brick dust and cement dust; Suitable for sultry working environment. Features Item No.: ChemPro 6045 Color: Blue Feature: Breathable and comfortable Hood design for optimum fit with full face respirators Elasticated hood, wrist and ankles Bound seams Application : Against particulates such as asbestos, brick dust and cement dust; Suitable for sultry working environment.   Material: SMS non-woven fabric Standards: Type 5 EN ISO13982-1  Solid particulates Type 6 EN13034     Limited protection against liquid chemicals Solid particulates Protective clothing -C&G Safety : Solid particulates Protective clothing
阅读全文

What is the Hazard Risk Category (HRC) of NFPA 70E? -C&G Safety

图片
HRC is a 2004 NFPA 70E rating of exposure levels for particular types of equipment. The values range from zero to four, with a zero HRC not requiring any ATPV-rated PPE. The minimum ATPV rating for Categories One through Four are as follows: Category One: five calories per square centimeter Category Two: eight calories per square centimeter Category Three: 25 calories per square centimeter Category Four: 40 calories per square centimeter The following chart illustrates the five HRC levels with corresponding clothing, layer requirements and minimum arc ratings. Overclothing: Any arc-flash rated clothing with a HAF of less that 70 percent is considered overclothing. This means that the  flash-rated clothing  must be worn over a suitable undergarment to protect the wearer. Typically, the undergarments in this situation would be 100 percent cotton. Other undergarment fabrics may be required in special situations. What is the Hazard Risk Category (HRC) of NFPA 70E? -C&G Saf...
阅读全文