C&G Safety your safe choice!

Maintenance: 1. The flame retardant clothing should be completely dry before being stored again. 2. Check the status of flame-retardant working clothes after each use. 3. Remove residual dirt from the flame retardant clothing, use neutral soap, and use detergent when necessary. 4. The detergent should be used carefully in the polluted places to avoid damaging the aluminized surface. If there is oil or grease residue, clean with neutral soap. 6. If the flame retardant clothing is exposed to chemicals or if there are bubbles, clean the entire aluminized surface. 7. If there is no serious wear or burn on the surface of the fire retardant overalls, repair with an aluminized spray gun. If the exterior of the flame retardant suit is damaged, the flame retardant suit should be replaced. 8. It is easy to change the goggles, unzip the back and open the nylon buckle on the right side of the goggles. Take out the unusable goggles, insert them into your new goggles, and carefully pu

Buying flame-retardant overalls depends on the cost performance At present domestic fire-retardant overalls manufacturers, does not have relevant qualification and relevant qualifications and test equipment manufacturers have, some manufacturers believe that as long as it is use flame retardant fabrics produced by the clothes can be called fire-retardant overalls. Many users wonder: do not know how to choose flame-retardant clothing manufacturers, different manufacturers of flame-retardant clothing prices are very different. What's the difference between fireproof overalls at different prices? Or a higher price? Of course, it's common sense that premium products are relatively expensive. But I did not equal protection product sales partner performance is good, everyday we often find many non-standard or not qualified factories still use normal polyester cotton or polyester - cotton flame retardant so-called line on the flame retardant sewing overalls. Such clothes will burn s

Nomex flame retardant clothing for industrial use : Nomex flame retardant clothing for industrial use C&G Offer Nomex Workwear 4.5 Oz And 6.0 Oz Full Sleeves Coveralls With Cuff Button, With 2 Way Auto Lock Brass Front Concealed Zip With 3 Bottons, Two Chest Pocket With Flap Brass Zip & Botton, Pen Pocket On Sleeve, Two Cross Front Pocket With Side Access With Button , Two Back Patch Pocket One With Button Second With Flap & Button ,one Back Loop And Hang Loop ,one Side Pocket With Flap, Full Back Elasticated Waistband,back Shoulder Plitt. What is Nomex® IIIA? DuPont® Nomex® IIIA is composed of 93% 1.7 decitex Dupont® Nomex® meta-aramid, 5% DuPont® Kevlar® para-aramid and 2% antistatic fiber. This innovative solution expands to form a stable and inert barrier between the fire and skin, which gives wearers the valuable seconds they need to help them escape from the hazard. Why do we choose C&G® Nomex® IIIA flame resistant garments? Nomex® is inherently flame resistant.

The four categories of flame resistant workwear -C&G Safety : The four categories of flame resistant workwear Flame-resistant workwear are the following four categories: 1. High temperature flame resistant workwear: is made of high temperature flame resistant fabric made of protective clothing. 2. Polyester cotton flame resistant workwear: is the use of cross-linked resin, phosphorus flame resistant and other materials to baking baking process finishing polyester-cotton blended fabric made of protective clothing. Its moisture permeability, resistance to melting, washability, flame resistance and strength are better. 3.Cotton flame-resistant workwear: is the use of Pyroatex CP (N-hydroxymethyldimethylphosphonate acrylamide) or Proban NX (tetramethylol chloride, urea condensate) for finishing to have Flame resistant fabric made of flame resistant fabric. With Proban NX finishing, the damage to the raw materials is small, the fabric after the flame resistant, washability and soft fee

China flame retardant overalls : China flame retardant overalls Flame-resistant clothing  is also known as Flame resistant clothing,Flame-resistant work clothes, Flame-resistant protective clothing ,Anti flame-resistant work clothes, etc., It is one of the most widely used of personal protective products. The protective principle of flame-resistant clothing is mainly shielding effect such as heat insulation, reflection, absorption, carbonization and isolation. The flame-resistant clothing protects workers from being hurt by open fire or heat source.   C&G  flame resistant overalls  mainly adopts DuPont domestic exclusive Nomex IIIA advanced flame resistant cotton fabrics, moisture absorption, good air permeability, suitable for summer wear, DuPont Nomex fabric intrinsically flame resistant, high temperature resistance, thermal protection and has outstanding performance, wear resistance, antistatic, durable and excellent. It is widely used in fields such as oil field, metallurgy,

100 Percent Cotton: It was not all that long ago that plain old cotton was considered the appropriate  protective clothing  when an electrical arc exposure was present. The thinking was that cotton provided much better protection than polyester, nylon, acetate, and the like. This is true. However, along came products that soon made untreated cotton an undesirable fabric for these situations. Flame-Resistant Treated 100 Percent Cotton: One such fabric available today is marketed under the trade name "Indura." This fabric is made by Westex and is guaranteed to maintain flame resistant performance throughout the life of the garment. This fabric has an expected wear life of 50 to 75 home launderings. This means that five sets of shirts and pants, each worn once per week, will last 12 to16 months in the range of light- to severe-use conditions. In Indura-engineered fabrics, the flame resistant chemical impregnated on the cotton fiber core acts as a catalyst promoting the charring